################################################ ### DM2_w24 # tanja.konrad@student.tugraz.at ### ### ue_05 UN_headquaters NYC ### ################################################ ############################## import rhinoscriptsyntax as rs import random, time, sys ### sys.path.append("P:/") ### import DM_lib as dm ### reload(dm) ############################## rs.UnitSystem(4) # km = 5, meters = 4, cm = 3 etc rs.ShowGrid(None, 0) # grid > 0 = off rs.ShowGridAxes(None, 1) # y/y/z axen display > 0/1 = off/on rs.ViewDisplayMode(rs.CurrentView(), "wireframe") rs.Command("cplane w t enter", 0) # cPlane World Top dm.PointRadius(displayModeX=0, rad=3, styl=3) dm.printDisplay(state=1) ### nomen est omen / printDisplay(state=1, scale=1000, thickness=1, color="Display") rs.EnableRedraw(0) ### MAC >> problem ! #dm.PointRadius(displayModeX=0, rad=2, styl=0, verbose=0) # 0 wireframe #dm.PointRadius(displayModeX=1, rad=17, styl=2, verbose=0) # 1 shaded #dm.PointRadius(displayModeX=2, rad=9, styl=3, verbose=1) # rendered ###_________________________________________# ### basic settings for grid to fit UN_slab # ### # ! no need 2 change ! floors = H = dm.H = 40 # default=40 / incl roof slabs = L = dm.L = 11 # default=11 depth = D = dm.D = 4 # default= 4 / division in building_depth floorHeight = fH = dm.fH = 4.0 # default= 4.0 / 4.0*(H-1) = 156 meters # ############# # get gridCoords L*D*H = 1760 UnoGridCoords = dm.getUnoGridCoords() # get from DM_lib as dm #################___________________________# dm.newEmptyLayer("UNO::setUp::points", [150,150,200] ) dm.newEmptyLayer("UNO::setUp::geo", [150, 20,150] ) dm.newEmptyLayer("UNO::setUp::crv", [250, 10, 10]) dm.newEmptyLayer("UNO::setUp", [120,120,140] ) ################ lengthVec = lVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) )) ## rs.AddPoint( dm.getUnoCoord(1, 0, 0) ) depthVec = dVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 1, 0), dm.getUnoCoord(0, 0, 0) )) ## rs.AddPoint( dm.getUnoCoord(0, 1, 0) ) dVec2 = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(1, 0, 0), dm.getUnoCoord(0, 0, 0) )) dVec3 = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 0, 1), dm.getUnoCoord(0, 0, 0) )) ################ if 1: ### DEMOs / SETUP >> dont' exec @ homework ! if 1: rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(10, 0, 0) ) rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord( 0, 3, 0) ) rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord( 0, 0, 39) ) for y in range(slabs): for x in range(depth): rs.AddLine( dm.getUnoCoord(y, x, 0), dm.getUnoCoord( y, x, 39) ) #rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord( 0, 0, 0) ) # rs.CurveArrows(rs.AllObjects()[0], arrow_style=2) # rs.CurveArrows(rs.AllObjects()[1], arrow_style=2) # rs.CurveArrows(rs.AllObjects()[2], arrow_style=2) # rs.ObjectColor(rs.AllObjects()[2], [0, 222, 0] ) # rs.ObjectColor(rs.AllObjects()[1], [222, 0, 0] ) # rs.ObjectColor(rs.AllObjects()[0], [0, 0, 222] ) rs.ObjectPrintWidth( rs.AllObjects()[0:3], 1.0 ) p0 = dm.getUnoCoord( 0, 0, 0) p1 = dm.getUnoCoord( 10, 0, 0) p2 = dm.getUnoCoord( 10, 3, 0) p3 = dm.getUnoCoord( 0, 3, 0) unoBaseCoords = [p0, p1, p2, p3, p0] unoBaseCrv = rs.AddCurve( unoBaseCoords, 1) unoTopCoords = [dm.getUnoCoord( 0, 0, 39), dm.getUnoCoord( 10, 0, 39), dm.getUnoCoord( 10, 3, 39), dm.getUnoCoord( 0, 3, 39), dm.getUnoCoord( 0, 0, 39), ] unoTopCrv = rs.AddCurve( unoTopCoords, 1) rs.ZoomExtents() if 1: ############################## rs.CurrentLayer("UNO::setUp::points") #rs.AddPoints( UnoGridCoords ) #rs.AddLine(UnoGridCoords) #print "UnoGridCoords",UnoGridCoords # for i in range(L): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(i, 0, 0) ), [0, 222, 0] ) # for i in range(D): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(0, i, 0) ), [222, 0, 0] ) # for i in range(H): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(0, 0, i) ), [0, 0, 222] ) ############################## if 0: rs.CurrentLayer("UNO::setUp::crv") dm.UN_slab(showAll=1) for i in range(8): p0 = dm.getUnoCoord( random.randint(0,L-1), random.randint(0,D-1), random.randint(0,H-1) ) p1 = dm.getUnoCoord( random.randint(0,L-1), random.randint(0,D-1), random.randint(0,H-1) ) rs.AddCurve( [p0, p1] ) dm.textDots( [p0, p1] ) rs.ZoomExtents() if 0: coords = UnoGridCoords[:] ### make COPY - not equal ! random.shuffle( coords ) rs.AddCurve( coords[0:], random.randint(1, 3) ) ################# ### abbreveation: def gC (l=1, d=2, h=3): cor = dm.getUnoCoord(l, d, h) return cor # rs.AddPoint( gC(1,0,1) ) ################# #_____________________________here you go: dm.newEmptyLayer("myPROJ", [100,100,100]) rs.CurrentLayer("UNO::setUp::crv") anz = 36*6 depth = 4.5#5.5 #rad = 5.0 p0 = gC( 5, 1, 0) lenX = rs.Distance(gC( 5, 0, 0), gC( 0, 0, 0))+depth*2 ### laenge des anfangs center point zur aussenkante d gebaeudes #deltaLen = (lenX-rad)/(anz+1) deltaAng = 10.0 ## grad deltaZ = 156/(anz)#+0) coords = [] for i in range(anz+1): # rad += deltaLen vec = rs.VectorScale(lVec, lenX) vec = rs.VectorRotate( vec, i*deltaAng, [0,0,1]) vec[2] = i*deltaZ #rs.AddLine( p0, rs.VectorAdd(p0, vec)) if i > 2 and i < 15: vec = rs.VectorAdd(vec, rs.VectorScale( dVec, 50.0 ) ) if i > 21 and i < 36: vec = rs.VectorAdd(vec, rs.VectorScale( dVec, -50.0 ) ) coords.append(rs.VectorAdd(p0, vec)) ### vektoren verschieben, 6x top = gC(10,0,39) coords.append(rs.VectorAdd(top, rs.VectorScale( dVec3, 10.0 ) )) height = 39 rows = 10 z = 1 lenY = rs.Distance(gC( 10, 3, 0), gC( 10, 0, 0)) for i in range(15): p = rs.VectorScale(lVec, lenY) p = gC (rows, 3, height) #print "p",p coords.append(p) height = height-1 p = gC (rows, 0, height) coords.append(p) height = height-1 #print "i",i crvDiv = 88 crv = rs.AddCurve( coords, 2 ) coords = rs.DivideCurve( crv, crvDiv, create_points=0 ) #rs.AddPoints( coords ) for cor in coords: pass #rs.AddCircle( cor, 5.5 ) #rs.CurvePerpFrame() ##CurvePerpFrame(curve_id, parameter) dom = rs.CurveDomain( crv ) dom = rs.CurveDomain( crv )[1] circDiv = 33 allCoordsLists = [] for cor in coords: #print i middle = gC(5,2,39) bottom = gC(8,0,0) paraX = rs.CurveClosestPoint( crv, cor ) planeX = rs.CurvePerpFrame( crv, paraX ) circ = rs.AddCircle( planeX, depth) circCoords = rs.DivideCurve( circ, circDiv, 0) if i < 30: rs.ObjectColor(rs.AddLine (middle, coords[i]),[0,0,0]) if i > 40 and i < 80: rs.ObjectColor(rs.AddLine (bottom, coords[i]),[0,0,0]) rs.DeleteObject( circ ) allCoordsLists.append( circCoords ) i = i + 1 i = 0 for i in range(circDiv): coords = [] for list in allCoordsLists: pX = list[i] coords.append( pX ) curve = rs.AddCurve(coords,2) start = rs.CurveStartPoint(curve) #Streben middle = gC(5,2,39) bottom = gC(8,0,0) coords.append(start) curveDiv = rs.DivideCurve( curve, crvDiv, create_points=0 ) #print curveDiv # if i <5: # rs.ObjectColor(rs.AddLine (middle, coords[i]),[0,0,0]) # if i > 17 and i < 22: # rs.ObjectColor(rs.AddLine (bottom, curveDiv[i]),[0,0,0]) rs.DeleteObject(curve) curve = rs.AddCurve(coords,2) if pX[2] < 168: rs.ObjectColor(curve,[0,0,0]) else: rs.ObjectColor(curve,[255,0,100]) rs.DeleteObject(crv) #____________________________:here you end ################################### dm.zA( proz=0.95 ) rs.EnableRedraw(1) ### 4 the MACs #dm.printDisplay(1) rs.CurrentLayer("Default")