###################################
### DM2_w23 # AGruber@tugraz.at ###
### hu_06 UN_headquaters  NYC   ###
### paneling                    ###
###################################


##############################
import rhinoscriptsyntax as rs
import random, time, sys   ###
sys.path.append("P:/")     ###
sys.path.append("P:/WWW/flobber27/dm2")     # path for library !!
import DM_lib as dm        ### reload(dm)
##############################      

rs.UnitSystem(4)                                        # km = 5, meters = 4, cm = 3 etc
rs.ShowGrid(None, 0)                                    # grid > 0 = off
rs.ShowGridAxes(None, 1)                                # y/y/z axen display > 0/1 = off/on
rs.ViewDisplayMode(rs.CurrentView(), "wireframe")
rs.Command("cplane w t enter", 0)						# cPlane World Top
dm.PointRadius(displayModeX=0, rad=3, styl=3)
dm.printDisplay(0)                                      # nomen est omen
rs.EnableRedraw(0)



###_________________________________________#
### basic settings for grid to fit UN_slab  #
###                                         # 
floors = H  = dm.H = 40                     # default=40 / incl roof
slabs  = L  = dm.L = 11                     # default=11
depth  = D  = dm.D =  4                     # default= 4 / division in building_depth
floorHeight = fH = dm.fH = 4.0              # default= 4.0 / 4.0*(H-1) = 156 meters
                                            #
################                            # get from DM_lib as dm:
UnoGridCoords  = dm.UnoGridCoords       # get gridCoords L*D*H = 1760
UnoPanelCoords = dm.UnoPanelCoords      # get panelCoords [frontPanels, backPanels, sidePanels, upSidePanels] / default arguments s.u.
################____________________________#

dm.newEmptyLayer("UNO::setUp", [120,120,140])


##################
depthVec  = dVec = dm.dVec
lengthVec = lVec = dm.lVec
##################

if 1: ### SETUP >> dont' exec @ homework !
    rs.AddCurve( [dm.getUnoCoord(0,0,0), dm.getUnoCoord(0,0,39), dm.getUnoCoord(10,0,39), dm.getUnoCoord(10,0,0), dm.getUnoCoord(10,3,0), dm.getUnoCoord(0,3,0), dm.getUnoCoord(0,3,39), dm.getUnoCoord(10,3,39)], 1)
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 1, 0) ), [222, 0, 0] )
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) ), [0, 222, 0] )
    rs.ObjectColor(rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 0, 2) ), [0, 0, 222] )
    rs.ObjectPrintWidth( rs.AllObjects()[0:3], 1.0 )
    #rs.AddPoints( UnoGridCoords )
    rs.ZoomExtents()

#UnoPanelCoords = dm.getUNpanelCoords(anzL=10, anzH=39, anzD=3, stepL=1, stepH=1, stepD=1)
frontPanels   = UnoPanelCoords[0]
backPanels    = UnoPanelCoords[1]
sidePanels    = UnoPanelCoords[2]
upSidePanels  = UnoPanelCoords[3]
allPanels     = UnoPanelCoords[4]



#_____________________________here you go:
dm.newEmptyLayer("myPROJ", [200,100,200])


#coords = frontPanels[5]
#rs.AddPoints(coords)
#dm.textDots(coords)
#rs.AddCurve( coords, 1)

def myPanel(panel, vorneFac = 5.5):
    p_0, p_1, p_2, p_3 = panel
    
    rs.AddCurve(panel)
    rs.AddCurve([p_0, p_2])
    
    nVec = dm.normVec3pnts(p_0, p_1, p_2)
    centerPt = dm.pntCentroid(panel)
    
    #nVec = rs.VectorUnitize(rs.VectorSubtract(pWest, centerPt))
    
    zValue = centerPt[2]
    
    rs.AddPoint(centerPt)
    pointVorne = pv = rs.VectorAdd(centerPt, rs.VectorScale(nVec, zValue/vorneFac))
    rs.AddCurve([p_0, pv, p_3],1)
    rs.AddCurve([pv, centerPt])


pWest = rs.VectorAdd(dm.getUnoCoord(5,0,0), rs.VectorScale(dVec, -100))
rs.AddPoint(pWest)


for panel in allPanels:
    myPanel(panel)




#for i in range(len(frontPanels)):
#    rs.AddCurve(frontPanels[i], 1)


#____________________________:here you end

###################################
rs.ZoomExtents()
rs.EnableRedraw(1) ### 4 the MACs
dm.printDisplay(1)
dm.newEmptyLayer("Default")