##################################
### DM2_w23 # AGruber@tugraz.at ###
### ue_05 UN_headquaters  NYC   ###
###################################


##############################
import rhinoscriptsyntax as rs
import random, time, sys   ###
sys.path.append("P:/")     ###
sys.path.append("P:/WWW/flobber27/dm2")     # path for library !!
import DM_lib as dm        ### reload(dm)
##############################      

rs.UnitSystem(4)                                        # km = 5, meters = 4, cm = 3 etc
rs.ShowGrid(None, 0)                                    # grid > 0 = off
rs.ShowGridAxes(None, 1)                                # y/y/z axen display > 0/1 = off/on
rs.ViewDisplayMode(rs.CurrentView(), "wireframe")
rs.Command("cplane w t enter", 0)						# cPlane World Top
dm.PointRadius(displayModeX=0, rad=3, styl=3)
dm.printDisplay(0)                                      # nomen est omen
rs.EnableRedraw(0) ### MAC >> uncomment !



###_________________________________________#
### basic settings for grid to fit UN_slab  #
###                                         # ! no need 2 change !
floors = H  = dm.H = 40                     # default=40 / incl roof
slabs  = L  = dm.L = 11                     # default=11
depth  = D  = dm.D =  4                     # default= 4 / division in building_depth
floorHeight = fH = dm.fH = 4.0              # default= 4.0 / 4.0*(H-1) = 156 meters
                                            #
#############                               # get gridCoords L*D*H = 1760
UnoGridCoords = dm.getUnoGridCoords()       # get from DM_lib as dm
#################___________________________#


dm.newEmptyLayer("UNO::setUp::points", [150,150,200])
dm.newEmptyLayer("UNO::setUp::geo", [150, 20,150])
dm.newEmptyLayer("UNO::setUp::crv", [200, 100, 100])
dm.newEmptyLayer("UNO::setUp", [120,120,140])


##################
depthVec  = dVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 2, 0) ))
lengthVec = lVec = rs.VectorUnitize(rs.VectorSubtract( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) ))
##################

if 1: ### SETUP >> dont' exec @ homework !
    if 0:
        rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(1, 0, 0) )
        rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 1, 0) )
        rs.AddLine( dm.getUnoCoord(0, 0, 0), dm.getUnoCoord(0, 0, 1) )
        rs.ObjectColor(rs.AllObjects()[2], [0, 222, 0] )
        rs.ObjectColor(rs.AllObjects()[1], [222, 0, 0] )
        rs.ObjectColor(rs.AllObjects()[0], [0, 0, 222] )
        rs.ObjectPrintWidth( rs.AllObjects()[0:3], 1.0 )
        
        p0 = dm.getUnoCoord(  0, 0, 0)
        p1 = dm.getUnoCoord( 10, 0, 0)
        p2 = dm.getUnoCoord( 10, 3, 0)
        p3 = dm.getUnoCoord(  0, 3, 0)
        unoBaseCoords = [p0, p1, p2, p3, p0]
        unoBaseCrv = rs.AddCurve( unoBaseCoords, 1)
        unoTopCoords = [dm.getUnoCoord(  0, 0, 39),
                        dm.getUnoCoord( 10, 0, 39),
                        dm.getUnoCoord( 10, 3, 39),
                        dm.getUnoCoord(  0, 3, 39),
                        dm.getUnoCoord(  0, 0, 39),
                       ]
        unoTopCrv = rs.AddCurve( unoTopCoords, 1)
        rs.ZoomExtents()
    if 0:
        ##############################
        rs.CurrentLayer("UNO::setUp::points")
        rs.AddPoints( UnoGridCoords )
        for i in range(L): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(i, 0, 0) ), [0, 222, 0] )
        for i in range(D): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(0, i, 0) ), [222, 0, 0] )
        for i in range(H): rs.ObjectColor( rs.AddTextDot( str(i), dm.getUnoCoord(0, 0, i) ), [0, 0, 222] )
        
        ##############################
    if 0:
        rs.CurrentLayer("UNO::setUp::crv")
        for i in range(8):
            p0 = dm.getUnoCoord( random.randint(0,L-1), random.randint(0,D-1), random.randint(0,H-1) )
            p1 = dm.getUnoCoord( random.randint(0,L-1), random.randint(0,D-1), random.randint(0,H-1) )
            rs.AddCurve( [p0, p1] )
            dm.textDots(  [p0, p1] )
        rs.ZoomExtents()
    if 0:
        coords = UnoGridCoords[:] ### make COPY - not equal !
        #random.shuffle( coords )
        rs.AddCurve( coords[0:], 2 )

#_____________________________here you go:
dm.newEmptyLayer("myPROJ", [100,100,100])

px = dm.getUnoCoord( 0,0,0 )

#rs.AddPoint(px)
#rs.AddPoint( dm.getUnoCoord( 10,0,0 ) )


p_0 = rs.VectorAdd(dm.getUnoCoord(5,0,20), rs.VectorScale(dVec, 50))
#rs.AddPoint(p_0)

p_1 = dm.getUnoCoord(2,0,5)
p_2 = dm.getUnoCoord(5,3,20)

p_3 = rs.VectorAdd(dm.getUnoCoord(10,3,20), rs.VectorScale(lVec, -150))

p_4 = rs.VectorAdd(dm.getUnoCoord(10,0,10), rs.VectorScale(dVec, 50))

crv = rs.AddCurve([p_0, p_1, p_2, p_3, p_4, p_0],2)

dom = rs.CurveDomain(crv)[1]        # erster wert immer 0, da anfang gleich

print dom

#pX = rs.EvaluateCurve(crv, dom*0.51)
#rs.AddPoint(pX)
#rs.AddPoint(rs.EvaluateCurve(crv, dom*0.52))

anzahl = 32
rad = 5.25
circDivision = 32


pX_list = []
plane_x_list = []
circdiv_list = []


for i in range(anzahl+1):
    para = dom/anzahl*i
    pX = rs.EvaluateCurve(crv, para)
    pX_list.append(pX)
    plane_x = rs.CurvePerpFrame(crv, para)
    plane_x_list.append(plane_x)

#rs.AddPoints(pX_list)

for plane in plane_x_list:
    circ = rs.AddCircle(plane, rad)
    coords = rs.DivideCurve(circ, circDivision, 0)
    circdiv_list.append(coords)
    spant = rs.AddCurve(coords[int(circDivision*0.5):],1)
    rs.DeleteObject(circ)
    rs.ObjectPrintColor(spant, [0,0,150])
    rs.ObjectPrintWidth(spant, 1.5)






i=0
coords = []

for i in range(int(circDivision*0.5), circDivision):
    for coordlist in circdiv_list:
        p0 = coordlist[i]
        coords.append(p0)
    rs.AddCurve(coords)



#rs.AddCurve(coords,1)



#____________________________:here you end

###################################
rs.ZoomExtents()
rs.EnableRedraw(1) ### 4 the MACs
dm.printDisplay(1)
dm.newEmptyLayer("Default")